Skip to main content

Hasło pobierania i wgrywania projektu – MT6000/MT8000

Streszczenie: Zmiana haseł w panelach MT6000/MT8000 w zakładce „Security” ustawień systemowych: hasło lokalne (ustawienia), hasło wgrywania, hasło pobierania i hasło wgrywania danych historycznych. Hasło fabryczne: 111111.
EN: How to set Local, Upload, Download and Upload (History) passwords on MT6000/MT8000 HMIs (factory default 111111).

Dotyczy: panele HMI Weintek MT6000/MT8000
Źródło: Weintek FAQ (materiały producenta), oryginalny tytuł: „MT6000/8000 Series HMI Upload/Download password Setup”

MT6000/8000 series HMI provide reliable password protection. The factory initially set password to six 1’s (111111). Users can setup their own password, as follows:


1. Click the “<” icon on the down-right corner, and the status bar will appear. Click “Setting” icon, a popup window shows up and ask user to enter the password. As shown below:

image.pngIlustracja: Hasło pobierania i wgrywania projektu – MT6000/MT8000 – As shown below:

2. Enter password. The factory initial password is “111111”. Click “OK” and the “System Settings” window shows up.

image.pngIlustracja: Hasło pobierania i wgrywania projektu – MT6000/MT8000 – Click “OK” and the “System Settings” window shows up.

3. Switch to “Security” tab, there four kinds of password can be changed as shown in the following picture:

image.pngIlustracja: Hasło pobierania i wgrywania projektu – MT6000/MT8000 – Switch to “Security” tab, there four kinds of password can be changed as shown in the following picture:

Local Password
Password that is needed while entering “System Settings”;


Upload Password
Password that is needed while uploading program;


Download Password
Password that is needed while downloading program;


Upload (History) Password
Password that is needed while uploading data and event log file;


4. Click “Upload Password” will show the dialog below. Enter the new password twice. Comparing two passwords, if they are the same, a “Password match” message will show up. On the contrary, a “Password NOT match !” message will show up. Click “OK” to complete.

image.pngIlustracja: Hasło pobierania i wgrywania projektu – MT6000/MT8000 – Click “OK” to complete.

Click “Apply” to activate the new password. Next time the user wants to upload project, he needs to enter the new password.
The four kinds of password follow the same process above to be modified. Make sure to enter the correct password to operate the MT6000/MT8000 HMI. The EasyBuilder Pro should setup the same password as the HMI for uploading/downloading program.

 

 

Słowa kluczowe

hasło, password, hasło pobierania, download password, hasło wgrywania, upload password, local password, Upload History password, Security, 111111, MT6000, MT8000, MT6000/8000 Series HMI Upload/Download password Setup