Skip to main content

Kabel USB do połączenia HMI z PC – wymagania

Streszczenie: Wymagania dla kabla USB przy pobieraniu projektu do HMI: port USB 2.0/3.0 w PC, kabel z podwójnym ekranowaniem (folia + oplot), długość poniżej 1,8 m, podłączenie z tyłu komputera stacjonarnego, odłączenie innych urządzeń od HMI. Przy błędach pobierania – ręczna aktualizacja sterownika z katalogu usbdriver EasyBuilder.
EN: Requirements for the USB cable used to download projects to a Weintek HMI (USB 2.0/3.0, double shielded, under 1.8 m) and USB driver troubleshooting.

Dotyczy: panele HMI Weintek z portem USB do pobierania projektu; EasyBuilder Pro
Źródło: Weintek FAQ (materiały producenta), oryginalny tytuł: „Notes on USB Cable”

The following are some important points relevant to USB cable:
HI-SPEED USB Revision 2.0 SHIELDED 24AWG

1. The PC must support USB 2.0 or USB 3.0.
2. Use a double shielding USB cable: Foil+ Braid Shield.

image.pngIlustracja: Kabel USB do połączenia HMI z PC – wymagania – Foil+ Braid Shield.


3. The length of the cable should be limited to less than 1.8 meters.
4. If a desktop is used, the USB cable must be plugged into the back panel instead of the front. If a laptop is used, please remove the external power supply.
5. When downloading a project through USB cable, please remove all the other devices that are connected to HMI.
6. If download fails, the possible cause can be the incompatible USB driver on PC. Go to Computer Management » Device Manager to check if the correct USB driver is installed. If not, please go to the installation folder of EasyBuilder and find the usbdriver folder, to manually update the driver.

image.pngIlustracja: Kabel USB do połączenia HMI z PC – wymagania – If not, please go to the installation folder of EasyBuilder and find the usbdriver folder, to manually update the…

image.pngIlustracja: Kabel USB do połączenia HMI z PC – wymagania

 

 

Słowa kluczowe

kabel USB, USB cable, ekranowanie, double shielding, długość kabla 1,8 m, USB 2.0, pobieranie projektu, download project, sterownik USB, usbdriver, Menedżer urządzeń, błąd pobierania, Notes on USB Cable