Skip to main content

Komunikacja MPI 187,5 kb/s z Siemens S7-200/S7-300

Streszczenie: Komunikacja z Siemens S7-200/S7-300 przez wbudowane MPI 187,5 kb/s w panelach MT6000i/MT8000i (wersja V2/H2), MT8000X i WT: wybór sterownika S7-300 MPI lub S7-200, jedno urządzenie 187,5K na HMI, bez trybu Extended Address; schemat połączenia RS-485.
EN: Using built-in 187.5 kbps MPI to communicate with Siemens S7-200/S7-300 PLCs on MT6000i/MT8000i (V2/H2), MT8000X and WT series.

Dotyczy: MT6000i/MT8000i (V2/H2), MT8000X, WT; Siemens S7-200/S7-300
Źródło: Weintek FAQ (materiały producenta), oryginalny tytuł: „How to use 187.5K on S7-200/S7-300 PLC”

1. Built-in MPI with 187.5K baud rate function is available on all of the MT6000i, MT8000i, MT8000X and WT series models.
(Note! On the MT6000i, MT8000i, MT8000X series, only the version 2 (V2 / H2) can support the function.)


2. To select SIEMENS S7/300 MPI driver for S7-300 and S7-200 PLC, or select SIEMENS S7/200 driver and set the baud rate to 187.5K. (EasyBuilder Pro must be V3.10 or newer for i series and V4.10 or newer for X series.)


3. One HMI is able to connect to one 187.5K device only.


4. It doesn’t support to use Extended Address mode.


Note:
(1) i series COM1 RS485 and COM3 RS485 can both be used for connecting PLC, however, connecting 2 MPI PLC simultaneously is not allowed.


(2) X series supports COM1 RS485 2W only..
Please refer to below for connection diagram: 

image.pngIlustracja: Komunikacja MPI 187,5 kb/s z Siemens S7-200/S7-300 – (2) X series supports COM1 RS485 2W only..Please refer to below for connection diagram:

Słowa kluczowe

MPI, 187.5K, 187,5 kb/s, Siemens, S7-200, S7-300, sterownik S7-300 MPI, RS-485, COM1, COM3, Extended Address, schemat połączenia, How to use 187.5K on S7-200/S7-300 PLC