Skip to main content

Konfiguracja czytnika kodów kreskowych

Streszczenie: Przygotowanie czytnika kodów kreskowych do pracy z HMI przez zeskanowanie kodów konfiguracyjnych: przykład Symbol LS1203 (RS-232) i ZEBEX (USB, klawiatura US, tryb Trigger).
EN: How to configure a barcode scanner for the HMI by scanning setup codes: Symbol LS1203 (RS-232) and ZEBEX (USB) examples.

Dotyczy: panele HMI Weintek; czytniki Symbol LS1203, ZEBEX USB
Źródło: Weintek FAQ (materiały producenta), oryginalny tytuł: „How to Set Barcode Scanner ?”

[RS-232]


Take symbol type LS1203 as an example, Barcode Scanner should be setbefore using, and scan from Step1 to Step6 in sequence.


Step1. [Keyboard Wedge Interface]
IBM PC/AT and IBM PC COMPATIBLES 

image.png

Step2. [Country Keyboard Types (Country Codes)]
NORTH AMERICAN (Default) 

image.png

 

Step3. [RS-232 Interface]
STANDARD RS-232 

image.png

Step4 ~ 6. [Set Scan Data Transmission Format] SCAN OPTIONS ENTER

image.png

[USB]
Take ZEBEX USB Barcode Scanner as an example, settings should be done before using. Set the Interface first, scan from Step1~Step3.
Step1. Start of Configuration
Step2. [Interface Selection] ->USB
Step3. End of Configuration 

image.png

Now go on to USB Mode basic settings, scan from Step1 ~ Step5.


Step1. Start of Configuration
Step2. [Keyboard Type] -> US Keyboard
Step3. [Good Read Beeper Selection] -> Medium
Step4. [Scanning Mode Selection] -> Trigger Mode
Step5. End of Configuration

image.png

Słowa kluczowe

czytnik kodów kreskowych, barcode scanner, Symbol LS1203, ZEBEX, RS-232, USB, Keyboard Wedge, kody konfiguracyjne, US Keyboard, Trigger Mode, How to Set Barcode Scanner ?