Skip to main content

81. Set IP for new HMI

Streszczenie: Jak szybko nadać adres IP nowemu panelowi HMI Weintek, który fabrycznie ma włączone DHCP i adres 0.0.0.0, aby pobrać projekt przez Ethernet bez routera. W projekcie demonstracyjnym paneli serii iE, XE i eMT funkcja „Fix IP” ustawia adres 192.168.0.211 z maską 255.255.255.0; komputer należy ustawić na adres z tej samej podsieci (192.168.0.x, z wyjątkiem 211).
EN: How to give a new Weintek HMI (iE, XE, eMT series; factory DHCP, IP 0.0.0.0) the fixed IP 192.168.0.211 using the Fix IP function of the demo project, so a project can be downloaded over Ethernet without a router.

Dotyczy: panele HMI Weintek serii iE, XE i eMT (z fabrycznym projektem demonstracyjnym)
Źródło: Weintek FAQ (materiały producenta)

How to quickly assign an IP address of a new HMI in order to download projects without a router?

New HMI arrives having DHCP setting, and IP address of 0.0.0.0. To enable network functions, it is necessary to connect the HMI to a DHCP server (usually by means of a router) or manually enter the IP address. This document explains how to use the pre-loaded program to assign a preset IP address, without having to manually assign one. With a valid IP address, projects can then be updated over Ethernet.
This feature is now built into the demo projects for the iE, XE, and eMT series.
The feature is located in the system setting/testing page of the demo project. Refer to the figures below for illustration.

Step 1. Click on “setting” icon for the model.
a) iE series

Krok 1a: ikona „setting” w projekcie demonstracyjnym – panel Weintek serii iE

b) eMT series

Krok 1b: ikona „setting” w projekcie demonstracyjnym – panel Weintek serii eMT

c) XE series

Krok 1c: ikona „setting” w projekcie demonstracyjnym – panel Weintek serii XE

Step 2. Click the icon “COM port test” or “Modbus Server”.

Krok 2: ikony „COM port test” i „Modbus Server” w projekcie demonstracyjnym HMI Weintek

Step 3. Click “Fix IP”, and then IP: 192.168.0.211, subnet mask 255.255.255.0 will be set.

Krok 3: przycisk „Fix IP” – ustawienie IP 192.168.0.211 i maski 255.255.255.0 na panelu HMI Weintek

Finally, connect the computer and HMI with an Ethernet cable, and then set the network properties the computer as:
IP: 192.168.0.XXX (XXX=0~255, except 211)
Subnet: 255.255.255.0
Now the download utility on the computer will be able to find the HMI and download a project.

Powiązane strony

Słowa kluczowe

adres IP, ustawienie IP, nowy panel HMI, stały adres IP, Fix IP, set IP, IP address, DHCP, 0.0.0.0, 192.168.0.211, maska podsieci, subnet mask, pobieranie projektu przez Ethernet, download project, bez routera, projekt demonstracyjny, demo project, Weintek, HMI, iE, XE, eMT