Ustawianie adresu IP na panelu HMI
Streszczenie: Podgląd i ustawienie adresu IP bezpośrednio na panelu przez pasek ustawień systemowych: ikona koła zębatego, hasło 111111, zakładka Network (DHCP lub ręczny IP). Dotyczy serii eMT, iE, XE, mTV i i (nie cMT).
EN: How to view or set the HMI IP address on the HMI itself via the System Setting Toolbar (eMT, iE, XE, mTV, i series; not cMT).
Dotyczy: panele HMI Weintek serii eMT, iE, XE, mTV, i (nie dotyczy cMT)
Źródło: Weintek FAQ (materiały producenta), oryginalny tytuł: „How to set HMI IP on HMI?”
This FAQ explains how to view or set HMI IP address on HMI by using System Setting Toolbar.
Applicable Models: eMT, iE, XE, mTV, i Series
Non-applicable Models: cMT Series
Step 1. Hit the leftward arrow icon
in the lower-right corner of HMI screen.
Step 2. The following four icons open, hit the gear wheel icon.
Step 3. Enter password (Default: 111111) to open System Settings dialog box.
Step 4. In Network tab, two options exist:
[Obtain an IP Address Automatically]: Get IP automatically.
[IP address get from below]: Set IP manually.
Select one of the options and click [Apply] and then click [OK] to save the settings.
Step 5. Leave System Settings dialog box, hit the leftward arrow icon again, and then hit the notepad icon to view Network information.
Słowa kluczowe
adres IP, ustawienie IP, set IP, System Setting Toolbar, Network, DHCP, statyczny IP, hasło 111111, informacje o sieci, How to set HMI IP on HMI?



