Wymiana baterii – eMT3000 i seria i
Streszczenie: Wymiana baterii RTC (CR2032 3 V) w panelach eMT3000 i serii i: otwarcie tylnej pokrywy, wymiana baterii, ponowne ustawienie zegara. Napięcie baterii można odczytać z rejestru LW-9008 (float) – poniżej 2,8 V baterię należy wymienić.
EN: How to replace the CR2032 RTC battery in eMT3000 and i series HMIs; read battery voltage from LW-9008 (replace below 2.8 V).
Dotyczy: panele HMI Weintek eMT3000 i serii i
Źródło: Weintek FAQ (materiały producenta), oryginalny tytuł: „Battery Replacement for eMT / i series”
The eMT-3000 / i Series takes one coin type of CR2032 lithium battery to keep the RTC running. Battery specification: CR2032 3V lithium battery.
Steps for battery replacement:
1. Turn off the screen and open its rear cover.
2. Use a screwdriver to take off the battery from the socket.
3. Insert a new battery into the socket.
4. Put on the rear cover.
5. Reset the RTC time.
Note: Correct way to insert the new battery
Reading Battery Voltage
EasyBuilder Pro provides LW-9008 (32bit-float): battery voltage for detecting battery voltage. If the value of LW-9008 battery voltage is lower than 2.8, please replace the battery.
Słowa kluczowe
bateria, wymiana baterii, CR2032, RTC, zegar, battery replacement, LW-9008, napięcie baterii, 2.8 V, eMT3000, seria i, Battery Replacement for eMT / i series

