Skip to main content

Wymiana baterii – MT6050iB2/MT8050iB2

Streszczenie: Wymiana baterii RTC (CR2032 3 V z przewodami) w panelach MT6050iB2/MT8050iB2: odłączenie starej baterii od złącza na płycie głównej, podłączenie nowej, ustawienie zegara. Napięcie baterii w rejestrze LW-9008 – poniżej 2,8 V wymienić.
EN: How to replace the wired CR2032 RTC battery in MT6050iB2/MT8050iB2; check voltage in LW-9008 (replace below 2.8 V).

Dotyczy: panele HMI Weintek MT6050iB2/MT8050iB2
Źródło: Weintek FAQ (materiały producenta), oryginalny tytuł: „MT6050iB2 / MT8050iB2 Battery Replacement”

How to Replace Battery of MT6050iB2 / MT8050iB2?

The MT6050iB2 and MT8050iB2 series take one CR2032 lithium button battery (with wires) to keep the RTC running. Battery specification: CR2032 3V lithium battery. 

Steps for battery replacement:
Step 1. Turn off the HMI and open its rear cover.
Step 2. Unplug the battery wire of the battery ran out.
Step 3. Plug the new battery into the motherboard via the white connector.
Step 4. Put on the rear cover.
Step 5. Reset the RTC time. 

image.png

image.png

Reading Battery Voltage
EasyBuilder provides LW-9008 (32bit-float): battery voltage for detecting battery voltage. If the value of voltage is lower than 2.8, please replace the battery. 

Słowa kluczowe

bateria, wymiana baterii, CR2032, RTC, LW-9008, napięcie baterii, 2.8 V, MT6050iB2, MT8050iB2, MT6050iB2 / MT8050iB2 Battery Replacement