Zwiększenie odporności na zakłócenia – eMT3000
Streszczenie: Zwiększenie odporności paneli eMT3000 na zakłócenia (np. drganie kursora): aktualizacja obrazu OS, uziemienie zacisku FG na złączu zasilania i odizolowanie wsporników, panelu i szafy.
EN: How to improve eMT3000 interference resistance: update OS image, ground the FG terminal and isolate brackets from the cabinet.
Dotyczy: panele HMI Weintek eMT3000 (eMT3070A, eMT31xx)
Źródło: Weintek FAQ (materiały producenta), oryginalny tytuł: „eMT3000 Series Hardware Protection”
How to Enhance eMT3000 Interference Resistance?
The aluminum enclosure of eMT3000 Series has already provided good electric interference resistance, however, the interference may enter the unit through other path, and cause the pointer to jiggle during operation. The problem can be solved by adding some protection.
The following steps demonstrate how to enhance interference resistance.
Step 1. Update OS Image version.
| eMT3070A | |
| OS image | fw_emt37_20121128.zip |
| Reference | eMT3070A_series_Firmware_Upgrade.pdf |
| eMT31xx | |
| Update OS Ver.20120629 and previous versions to | fw_imx51_2012630.zip |
| Update OS Ver.20120713 and later versions to | fw_imx51_20121127.zip |
| Reference | eMT3000_series_Firmware_Upgrade.pdf |
Step 2. Connect the FG on the power connector of the unit to the ground.
Step 3. Separate the brackets, the unit, and the control box by attaching black insulation tube or insulation tape over the holes.
A: Isolating the brackets
Before
After (Use black insulation tube.)
(Use insulation tape.)
B: Attach insulation tape around the edge of the panel cutout.
Słowa kluczowe
zakłócenia, EMC, interferencje, odporność na zakłócenia, uziemienie, FG, drganie kursora, aktualizacja OS, eMT3000, eMT3070A, eMT3000 Series Hardware Protection




