Skip to main content

Ustawienia systemowe mTV-100

Streszczenie: Pierwsza konfiguracja i ustawienia systemowe Weintek mTV-100: pasek narzędzi systemowych i klawiatury ekranowe, ukrywanie paska przełącznikiem DIP 1, informacje o systemie (sieć, wersja) oraz zakładki System settings – sieć (adres IP), data i czas, zabezpieczenia (hasła, domyślnie 111111), czyszczenie historii, nazwa HMI, firmware i tryb pionowy, ustawienia pobierania – a także aktualizacja firmware z pliku NK.bin.
EN: Weintek mTV-100 system settings: system toolbar, system information, network, time/date, security passwords (default 111111), history, HMI name, firmware setting, miscellaneous and firmware upgrade with NK.bin.

Dotyczy: Weintek mTV-100
Źródło: dokumentacja producenta (Weintek), oryginalny tytuł: „System Settings”

For the first time operating the unit, please complete the following system settings. When finished, the project files designed using EasyBuilder can be used on HMI.

2.1 System Toolbar

After rebooting HMI, users can set the system with [System Toolbar] at the bottom of the screen. Normally, this bar is hidden automatically. Only by touching the target at the bottom-right corner of the screen will the System Toolbar pop up.

image.pngPasek narzędzi systemowych (System Toolbar) mTV-100 oraz klawiatury ekranowe: tekstowa i numeryczna

How to hide HMI System Setting Toolbar

When [DIP Switch 1] is set ON, the system setting toolbar is disabled. When set OFF; the system setting toolbar is enabled. Please restart HMI to enable/disable the toolbar. System register [LB-9020] can also enable/disable system setting toolbar When [LB-9020] is set ON, the toolbar is displayed, and set OFF to hide the toolbar.

2.2 System Information

image.pngOkno System Information mTV-100 – zakładki Network (adres IP, MAC) i Version (wersja systemu)

2.3 System Setting

Set or modify system parameters. Confirm password for security.

image.pngOkno System settings – wprowadzanie hasła dostępu do ustawień systemowych

Network

■ Network
Download project to HMI via Ethernet. Confirm IP address of target HMI. Select to obtain IP address automatically or specify an IP address.

image.pngZakładka Network w System settings – automatyczny lub ręczny adres IP, maska podsieci, brama

■

Time/Date 

Sets HMI local time/date.

image.pngZakładka Time/Date w System settings – ustawienie daty i czasu HMI

Security

■ Security
Password protection, the default is 111111.

image.pngZakładka Security w System settings – hasła Local, Upload, Download i Upload (History)

  • [Password for entering system]
  • [Password for uploading project]
  • [Password for downloading project]
  • [Password for uploading history data]

History

■ History
Clears history data in HMI.

[Recipe] / [Eventlog] / [Datalog]

image.pngZakładka History w System settings – czyszczenie receptur, dziennika zdarzeń i danych historycznych

■

HMI name

Sets HMI name to identify HMI during download/upload process and avoid remembering each HMI IP address.

image.pngZakładka HMI name w System settings – nazwa panelu do identyfikacji przy pobieraniu

■

Firmware setting

Upgrades firmware / enables portrait mode.

image.pngZakładka Firmware setting w System settings – aktualizacja firmware i tryb pionowy

Miscellaneous

■ Miscellaneous
Settings relevant to download process.

image.pngZakładka Miscellaneous w System settings – ustawienia związane z pobieraniem projektu

2.4 Upgrade firmware

Follow the steps to upgrade firmware.
1.

  1. Save the NK.bin file to SD card or USB disk.
    2.
  2. Open System Settings \ Firmware Setting tab, press [Upgrade firmware] and select the directory to store NK.bin.

image.pngAktualizacja firmware mTV-100 – wybór pliku NK.bin z karty SD lub pamięci USB

Słowa kluczowe

mTV-100, mTV, Weintek, ustawienia systemowe, System Settings, System Toolbar, pasek ustawień, System Information, adres IP, Network, Time/Date, data i czas, Security, hasło, 111111, Local Password, Upload Password, Download Password, History, Eventlog, Datalog, Recipe, HMI name, Firmware setting, portrait mode, tryb pionowy, aktualizacja firmware, NK.bin, karta SD, pamięć USB, DIP Switch 1