4. Arc Welding Control Functions
4.1Work Condition Inspection
⚫ Ensure the robot is properly positioned, anchored securely, and verify its operational status according to the ER Series Industrial Robot Operation Manual_RCS2 V1.15;
⚫ Connect the welding cables (positive and negative), to ensure that the welding table is not in electrical contact with the robot body;
⚫ Connect the communication cables between the welder and the robot (from the welder's communication box to the DB9 CANopen communication port on the robot controller), as well as the wire feeding machine cable;
⚫ Power up the robot and the welder. After the system is initiated, click on the wire feeding, gas feeding, and Wire Feed Back functions;
4.2Welding Enablement
Welding enablement serves as a mechanism to ensure the safe operation of welding equipment.
The system utilizes the welding enablement signal as a trigger to seamlessly control the initiation, progression, and conclusion of the welding process. When welding enablement is activated, users are permitted to automatically start the welder, wire feeder, gas feed unit, and other associated equipment during program execution. Conversely, when welding enablement is deactivated, the mentioned equipment will be disabled.
Welding enablement can be controlled using the teach pendant through two general methods:
⚫ Click the welding enablement button on the right side of the teach pendant interface. The welding enablement indicator on the status bar changes to
, and the button itself switches to "Welding Enablement ON".
Simultaneously, the green LED indicator for the teach pendant's welding enablement button lights up. Click the same button again to switch welding enablement OFF. This changes the indicator to , and the button to "Welding Enablement OFF". The green LED indicator on the teach pendant's welding enablement button will turn off.
⚫ Alternatively, press the welding enablement button on the teach pendant to control enablement switching.
4.3Gas Source Setup
Welding shielding gas serves as a crucial measure to ensure welding quality, and its source typically involves equipment such as gas cylinders, flow meters, pressure gauges, and ventilation pipelines. The operational state of the gas feed system is controlled using the teach pendant. To activate the gas feed system, you can either press and hold the gas feed button on the right side of the teach pendant interface or press and hold the gas feed button on the teach pendant itself. Upon activation, an audible sound from the gas valve switch confirms the opening of the gas feed unit.
4.4Wire Feed/Wire Feed Back Setup
The wire feeding system is an electromechanical device that facilitates automatic wire feeding