Skip to main content

10. Setting Codes

10.1 Introduction
The device supports configuring parameters via reading special codes that are called setting codes. Here we introduce common setting codes.

image.png

image.png

image.png

 

Via reading setting codes, the device can set enable/disable settings, set code type, set quantity of code reading, set data processing, set aiming system, set light source, set serial port, etc.
10.2 Enable/Disable Setting Codes
Before using other setting codes, you need to scan Enable Setting Codes first to activate the function of setting codes. Scan Disable Setting Codes to exit setting codes function.

image.png

 

10.3 Set Setting Codes of Code Type
The device can be set what code type to be read via reading specific setting codes. Currently, the device supports Code 39, Code 93, Code 128, CodeBar, ITF 25, ITF 14, EAN 8, EAN 13, UPCA, UPCE, QR Code, Data Matrix, Micro QR, AZTEC, PDF 417, and Han Xin Code.

image.png

image.png

image.png

image.png

image.png

 

10.4 Set Setting Codes of Code Color
The setting codes of code color include white code on black wall and black code on white wall.

image.png

image.png

image.png

 

10.5 Set Setting Codes of Code Reading Quantity
You can set the device’s code reading quantity via scanning the specific setting codes as shown below.
Steps
1. Read setting codes of editing quantity of code reading.

image.png

2. Read the corresponding digital codes according to actual demands.

image.png

image.png

3. Read the setting codes of saving to save the parameter settings. 

image.png

image.png

image.png

 

10.6 Set Setting Codes of Data Processing
You can set the device’s outputted code results via scanning the specific setting codes as shown below.
Steps
1. Read setting codes of enabling prefix or suffix

image.png

2. Read setting codes of editing prefix or editing suffix

image.png

3. Set prefix and suffix characters according to actual demands, find the corresponding hexadecimal code value in ASCII table (see Appendix A ASCII Table for details), and read the corresponding digital codes. For example, if the defined prefix and suffix content is *, the corresponding ASCII code is 2a. Use to the device to read the digital code 2 and digital code a in turn.

image.png

image.png

image.png

image.png

4. Read the setting codes of saving to save the parameter settings. 

image.png

 

10.7 Set Setting Codes of Aiming System
The aiming system is used to locate codes in the field of view to help read codes easily. The setting codes of aiming system can enable, disable, delay or set delay time of the aiming system.

image.png

image.png

 

10.8 Set Setting Codes of Light Source
The setting codes of light source can enable or disable the light source, set polling interval, etc. After enabling Light Polling, you can let red and while light sources polling alternately in accordance with configured interval when code reading succeeds or before ending trigger.

image.png

image.png

 

10.9 Set Setting Codes of Buzzer
The setting codes of buzzer can enable or disable the buzzer function, set its duration, etc.

image.png

image.png

 

10.10 Set Setting Codes of USB Communication
The setting codes of USB communication can enable or disable the USB communication function, set baud rate, etc.

image.png

image.png

image.png

 

10.11 Set Setting Codes of Serial Port
The setting codes of serial port can enable or disable serial port function, set the baud rate, parity bit, and stop bit.

image.png

image.png

image.png

 

10.12 Set Setting Codes of Sending Device Information
The device can send its information to the PC via reading specific setting codes, and the device information includes name, version, algorithm version, hardware version, serial number, etc.

image.png

 

10.13 Set Setting Codes of Trigger
The setting codes of trigger can let the device switch the trigger mode, including pressing trigger switch, self-trigger, response trigger, and support disabling trigger mode.

image.png

image.png

 

10.14 Set Setting Codes of Management
The setting codes of management can save or initialize user parameters, and restart the device.

image.png

image.png