Skip to main content

63. How to update HMI system setting by using USB drive or SD card?

System Setting Editor allows updating HMI system settings by using USB drive or SD card. The feature is available for HMI OS version 20131106 or later. The supported models are: eMT3000, MT8000iE, MT8000XE, and mTV. The following explains how to get HMI data by using EasySystemSetting tool, and then save the HMI data and the project to USB drive or SD card.

Step 1. On EasyBuilder Pro toolbar click [Tools] » [Build Data for USB Disk or SD Card Download] » [System Settings]. Or, directly run EasySystemSettings.exe under EasyBuilder Pro installation directory.

image.png

Step 2. Click [System Settings] to open System Setting Editor. 

image.png

Step 3. Specify HMI information and click [Export] to generate a .conf file. Click Exit.

image.png

Step 4. Select [Use system setting] check box and select the .conf file generated in previous step

image.png

Step 5. Click [Build] button to generate the file for download by using USB drive or SD card. A “config” folder can be found as shown below.

image.png

Step 6. Insert the storage device that stores the download file to HMI and the Download/Upload dialog box appears.

image.png

Step 7. Press [Load System setting] and then the [Download Config Settings] message appears. The project file will be updated after finishing system settings.

Note：
 The description of System Setting Editor buttons:

Setting Description Import Import and edit an existing .conf file Export Export the configured data to a .conf file Default Restore default


 If USB drive and SD card are both inserted to HMI, the data saved in SD card will be used.

 For more information about downloading project by using USB drive or SD card, see: FAQ13_How to download upload project with USB device

 If “Wrong Default Key!!” is displayed during download, please check local password

image.png

 

Back to top