Skip to main content

4. EQUIPMENT INSTALLATION TO THE ROBOT

4.1. FLANGE DIMENSION
This section describes the mounting face dimension of the end effector. Consider the depth of the screw holes and pin holes sufficiently before choose the length of the bolts and pins. Antirust measures of screws, grippers, etc., should be considered as well.

image.png

image.png

image.png

image.png

image.png

image.png

 

4.2. EQUIPMENT MOUNTING FACE
As shown in the figures below, tapped holes are provided to install equipment to the robot.

image.png

image.png

image.png

image.png

image.png

image.png

image.png

image.png

image.png

 

4.3. PIPES AND TUBES
The robot has inlets and outlets openings to supply air or hydraulic pressure to the end effector.

image.png

image.png