ESTUN- General Small Payloads Series Robot Body Operation Instructions
Instructions for Safe Use
This Chapter describes the content to be observed for the safe use of the robot. Before using, be...
Preface
This manual is applicable to the following robot type. List of relevant instructions
1.Transportation & Installation
1.1. Transportation Before moving the robot, position each joint of the robot into the handling ...
2. Connection with the Controller
The figure below shows the cables connect the robot with the controller. Connect these cables on ...
3. Specification
3.1. Robot configuration Figure 3.2 Robot configuration (ER12B-1510-LI, ER12B-1510) (Note 1) D...
4. Equipment Installation
4.1. End flange mounting interfaceThis section describes the mounting face dimension of the end f...
5. Check and Maintenance
Before performing any maintenance, be sure to read SAFETY PRECAUTIONS in Chapter 1 and understand...
6. Zero Calibration
6.1. IntroductionZero Calibration associates the angle of each robot axis with the pulse count va...
7. Troubleshooting
Be sure to read SAFETY PRECAUTIONS in Chapter 1 and understand its contents before any maintenanc...
Appendix
Appendix A Screw tightening torque list Appendix B Specifications and technical parameters of ...