Advanced Search
Search Results
904 total results found
Revision Record
ESTUN - SCARA Robot Mechanical Unit Operator's Manual
SAFETY
Installation and transportation of robots and robotic equipment shall be performed by qualified personnel and should conform to all national and local codes. Please read this manual and other related manuals before installing the robot system or before connect...
PREFACE
This manual describes the following robots. Related manuals
1. SPECIFICATIONS
1.1. Model Number 1.2. Part Names and Outer Dimensions 1.3. Specifications (*1) Conditions of Robot during measurement as follows:Operating conditions: Under rated load, 4-joints simultaneous motion, maximum speed, maximum acceleration, and ...
2. ENVIRONMENTS AND INSTALLTION
2.1. Environmental ConditionsA suitable environment is necessary for the robot system to function properly and safely. Be sure to install the robot system in an environment that meets the following conditions: *The ambient temperature conditions are for the R...
3. SETTING OF END EFFECTORS
3.1. Attaching an End EffectorUsers are responsible for making their own end effector(s). Before attaching an end effector, observe these guidelines. 3.1.1.ShaftAttach an end effector to the lower end of the shaft. For the shaft dimensions, and the overall di...
4. MOTION RANGE
4.1. Motion Range Setting by Mechanical StopsMechanical stops physically limit the absolute area that the Robot can move 4.1.1.Setting the Mechanical Stops of Joints #1 and #2Both Joints #1 and #2 have threaded holes in the positions corresponding to the...
5. MAINTENANCE
This chapter describes maintenance inspections and procedures. Performing maintenance inspections and procedures properly is essential for preventing trouble and ensuring safety. Be sure to perform the maintenance inspections in accordance with the schedule. ...
6. CALIBRATION
6.1. IntroductionCalibration associates the angle of each robot axis with the pulse count value supplied from the absolute Pulsecoder connected to the corresponding axis motor. To be specific, calibration is an operation for obtaining the pulse count value, co...
APPENDIX
Appendix A ER3 Maintenance Parts List Appendix B ER6 Maintenance Parts List Appendix C ER20 Maintenance Parts List
REVISION RECORD
ESTUN- Robot ERC3-C1 Series CE Version Control Cabinet Operation Manual
Foreword
This manual explains the usage of the ERC3-C1 control cabinet. The ERC3-C1 is a compact control cabinet.The compatible robot types for this control cabinet are as follows:
Revision History
Safety Precautions
This Chapter describes the content to be observed for the safe use of the robot. Before using, be sure to read and understand the content in this Chapter.1. Before installation, operation, maintenance, and troubleshooting, it is essential to thoroughly read an...
1. Product Information
1.1 Information on Nameplate 1.2 Designation 1.3 Product Dimensions 1.4 ComponentsExternal interface 1.5 Technical Parameters [Note] The dimensions given in the table include the rubber foot height of 13mm.
2. Transportation & Installation
2.1 Handling Procedures 2.1.1 Installation requirementsEnvironmental requirements: The operating environment temperature should be between 0°C and 45°C. During transportation and maintenance, the temperature range should be -20°C to 60°C. The relative hu...