Skip to main content

1. Safety

Robots generally have requirements which are different from other manufacturing equipment, such as larger working areas, high-speed operation, rapid arm movements, etc., which can pose safety hazards. Read and understand the instruction manuals and related documents, and observe all precautions in order to avoid the risk of injury to personnel and damage to equipment. It is the user's responsibility to ensure that their safe operating environment complies with and observes local and national safety-related laws, regulations and ordinances.

1.1 For your safety
1. Teaching maintenance of the robot must conform to:
Industrial Safety and Health Law
Enforcement Order of Industrial Safety and Health Law
Ordinance of Industrial Safety and Health Law
2. Other related laws are:
Occupational Safety and Health Act in USA.
Factory Act (Gewerbeordnung) in Germany.
Health and Safety at Work, etc. Act in UK.
EC Machinery Directive 89/392 and EEC Council Directive 91/368.
3. Safety work regulations
Observe the “Robots and robotic devices - Safety requirements for industrial robots” (ISO 10218) for safe operation of robots.
4. Other safety matters
Reinforce the SAFETY MANAGEMENT SYSTEM. Designate authorized workers and safety managers, as well as give continuing safety education.
Teaching and maintaining the robot are specified as "Hazardous Operations" in the Industrial Safety and Health Law (China only).
Workers employed in these above operations are requested to attend special training offered by 

1.2 Specialized training
Persons who teach or inspect the robot must undergo required training before using the robot.
For more information about training, please contact Nanjing Estun Robotics Engineering Co., Ltd.

1.3 List of instruction manuals of robots
Please make sure that you have been provided with all the following commands. In case of any missing, please contact Nanjing Estun Robotics Engineering Co., Ltd.
Instruction manuals of ER series robots
Electrical maintenance manuals of ER series robots

1.4 Safety precautions for operators
The maximum range of motion of the robot is potentially dangerous. All the involved workers (safety managers, installers, operators, and maintenance workers) must always be safety oriented to guarantee the safety of all workers.

image.png

 

 

⚫ Avoid any dangerous operations in the area where the robot is installed. There is a danger of injury if there is contact with the robot or peripheral equipment.
⚫ Please take strict safety precautions by placing signs such as "Flammable", "High Voltage", "Stopping", and "Off-limits to Unauthorized Personnel" in necessary areas in the factory. Failure to observe these cautions may result in fire, electric shock, or injury due to contact with the robot and other equipment.
⚫ Strictly observe the following items:
Always wear approved work clothes (no loose-fitting clothes).
Do not wear gloves when operating the robot.
Do not allow underwear, shirts, or neckties to hang out from the work clothes.
Do not wear large jewelry, such as earrings, rings, or pendants.
Wear protective safety equipment, such as helmets, safety shoes (with slip-proof soles), face shields, safety glasses, and gloves as necessary.
Improper clothing may result in bodily injury.
⚫ Unauthorized persons should not approach the robot or associated peripheral equipment. Failure to observe this may result in bodily injury due to contact with the control cabinet, the workpiece, the positioner, etc.
⚫ Never forcibly move the robot axes. Failure to observe this may result in bodily injury or equipment damage.

image.png

⚫ Never lean on the control cabinet, and avoid inadvertently pushing buttons.
Failure to observe this may result in bodily injury or damage by unexpected movement of the robot.

image.png

 

1.5 Robot safety precautions
1.5.1 Installation and wiring safety
When installing and wiring, please check the detailed information from the ER series robot instruction manual. During the installation preparation and installation process, the following matters should be observed to ensure the safety of the installation process.

image.png

⚫ Select an area such as that described below to install the robot: Confirm that the area is large enough so that the fully extended robot arm with tool will not reach a side wall, safeguarding, or the control cabinet.
Failure to observe this may result in bodily injury or damage resulting from unexpected movement of the robot.

image.png

⚫ Perform grounding in accordance with all applicable electrical codes and rules for internal wiring.
Failure to observe this may result in fire or electric shock.

image.png

⚫ Be sure there is sufficient room for maintenance on the robot, control cabinet, and other peripheral equipment. Failure to observe this caution could result in bodily injury during maintenance.
⚫ The robot is controlled by a control cabinet or a control cabinet for fixture use.
To ensure safety, be sure to operate the controller from a location where the robot is easily visible.
Operation by unauthorized personnel may result in bodily injury or equipment damage.
⚫ Install the control cabinet outside the safeguarding of the robot’s safety enclosure. Failure to observe this caution may result in bodily injury or damage to equipment resulting from contact with the robot.
⚫ Install the robot using bolts of the size and type specified for each robot in the instruction manual.
Failure to observe this may result in bodily injury or damage to equipment.
⚫ Be familiar with the connection diagram before wiring the control cabinet, and perform the wiring in accordance with the connection diagram. There is a danger of equipment damage or injury due to wrong wiring and unexpected movement of the equipment.
⚫ Protective measures shall be taken when wiring and piping between the control cabinet and robots and peripheral equipment, for example, thread the pipes, wires or cables through the pit or cover with protective covers to avoid being stepped on or being crushed by forklift.
⚫ Operators and other personnel may stumble on exposed wiring or piping. Cable damage can cause unexpected robot motion resulting in injury or property damage.

image.png

 

1.5.2 Work area safety
Carelessness contributes to serious accidents in the work area. To ensure safety, enforce the following precautions:

image.png

image.png

 

1.5.3 Operation safety

image.png

⚫ When attaching a tool to the robot, be sure to turn OFF the power supply of the control cabinet and the tool; lock the switch, and display a warning sign.

image.png

 

Turning the power ON during tool installation may case electric shock or injury due to unexpected movement of the robot.
⚫ Never exceed the rated capacity of the robot (capacity can be found in the specifications section of the robot manual.)
Failure to observe this may result in bodily injury or damage to equipment.
⚫ Teach jobs outside the robot’s work area whenever possible.
⚫ Observe the following precautions when performing teaching operations within the working envelope of the robot:
-Always view the robot from the front.
-Always follow the predetermined operating procedure.
-Always have an escape plan in mind in case the robot comes toward you unexpectedly.
-Ensure that you have a place to retreat to in case of emergency.
Improper or unintentional robot operation can result in injury.
⚫ Before operating the robot, check whether the SERVO ON lamp on the programming pendant goes out when the emergency stop buttons on the top right of front door of the control cabinet and programming pendant are pressed. And confirm that the servo lamp is turned OFF.
Injury or damage to machinery may result if the robot cannot be stopped in case of an emergency.
⚫ Prior to performing the following operations, be sure that no one is in the working envelope of the robot when:
- Turning ON the power of control cabinet.
- Moving the robot with the programming pendant.
- Running the system in the check mode.
- Performing automatic operations.
Injury may result from contact with the robot if persons enter the working envelope of the robot.
Press the E-stop button immediately if there are problems.
The E-stop buttons are located on the top right of front door of the control cabinet and programming pendant.

image.png

⚫ Perform the following inspection procedures prior to teaching the robot. If problems are found, correct them immediately, and be sure that all other necessary tasks have been performed.
⚫ - Check for problems in robot movement.
- Check for damage to the insulation and sheathing of external wires.
⚫ Always return the programming pendant to its hook on the control cabinet after use.
⚫ If the programming pendant is inadvertently left on the robot, a fixture, or on the floor, the robot or a tool could collide with it during robot movement, possibly causing injury or equipment damage.
⚫ Persons operating or inspecting the robot should be trained as required by applicable laws and company policies.

1.6 Notes for moving and transferring the robot
When moving or transferring the robot, observe the following safety precautions:
 Attach the commands to the robot when moving or transferring the robot so that all users have access to necessary manuals. See 1.3 “List of instruction manuals of robots” for a complete list of manuals.
 If any manuals are missing, contact the ESTUN Robotics Engineering Co., Ltd.
 If the warning labels on the robot and control cabinet are illegible, clean the labels so that they can be read clearly. Note that some local laws may prohibit equipment operation if safety labels are not in place.
 When the robot is transferred, it is recommended to check with the personnel dispatched by ESTUN Robotics Engineering Co., Ltd.
Incorrect installation or wiring may result in personal injury and property damage.
 Never modify the robot or the control cabinet. Failure to observe this precaution could result in bodily injury or damage resulting from fire, power failure, or operation error.

1.7 Notes on robot disposal
When disposing of the robot, follow the applicable national/ local laws and regulations.
Anchor the robot well, even when temporarily storing it before disposal. Failure to observe this precaution may result in injury due to the robot falling down.