Skip to main content

Safety Precautions

Robots generally have requirements which are different from other manufacturing equipment, such as larger working areas, high-speed operation, rapid arm movements, etc., which can pose safety hazards.
Read and understand the instruction manuals and related documents, and observe all precautions in order to avoid the risk of injury to personnel and damage to equipment. It is the user's responsibility to ensure that their safe operating environment complies with and observes local and national safety-related laws, regulations and ordinances.

image.png

Before using this manual, be sure to read this section and all the safety precautions in "Chapter 1 Safety".
⚫ This manual explains teaching, playback, programs and file editing of the ER series robots. Read this manual carefully and be sure to understand its contents before handling the robot.
⚫ Some drawings in this manual are shown with the protective covers or shields removed for clarity. Be sure all covers and shields are restored as required before operating this product according to this manual.
⚫ The drawings and photos in this manual are representative examples and differences may exist between them and the delivered product.
⚫ Estun may modify this model without notice when necessary due to product improvements, changes in specifications and modification to the manual for easier use. For the latest version, please concern our website, or contact our service department.
⚫ It is not allowed to add or delete part or all of the content without our consent. Never use part or all of the manual in the design of a third party.
⚫ Estun is not responsible for incidents arising from unauthorized modification of its products. Unauthorized modification voids your product’s warranty, and we bear no liability for the direct or indirect losses arising from this. 

image.png

⚫ Use of E-stop button
Before operating the robot, check that servo power is turned off when the E-stop button on the front door of the robot control cabinet and the programming pendant is pressed. In case of a servo emergency, if the robot cannot be braked in time, a personal injury or equipment damage may then be caused.
Once the servo power is turned on after the emergency stop is released, the accident that causing the emergency stop must be eliminated before turning on the servo power. Robot actions caused by misoperation may result in the personal injury accidents.

image.png

⚫ Observe the following precautions when performing teaching operations within the working envelope of the robot:
-View the robot from the front whenever possible.
-Always follow the operating procedure.
-Consider the contingency plan when the robot moves suddenly to the position you are located.
-Ensure that you have a safe place to retreat in case of emergency.
Improper or unintended robot operation may result in bodily injury.
⚫ Confirm that no persons are present in the robot’s working envelope and that you are in a safe location before:
 Turning ON the power of the control cabinet of robot.
 Moving the robot with the programming pendant.
 Running check operations.
 Performing automatic reproductions.
Injury may result if anyone enters the working envelope of the robot during operation. Always press an E-stop button immediately if there are problems. The E-stop button is located on the right of the control cabinet and the programming pendant. 

image.png

⚫ Perform the following inspection procedures prior to conducting robot teaching. If problems are found, repair them immediately, and be sure that all other necessary measures have been performed.
Check for problems in robot movement.
Check for damage to insulation and sheathing of external wires.
⚫ Always return the programming pendant to its original position after use.
The personal injury or damage to programming pendant may be caused if it is left in the robot, on the floor, or near fixtures, as in such a way it may collide with the robot or fixtures.
⚫ Read and understand the Explanation of Warning Labels in the instruction manuals of ER series robots before operating the robot.