Skip to main content

11. Device Maintenance

11.1 Update Firmware
The device supports updating firmware via the client software.

image.png

Steps
1. Select the device to be updated in the device list, and right click the device.
2. Click Firmware Update.
3. Click  image.pngto select update file from local PC, and click Update to update firmware.

image.png

image.png

 

11.2 Set Time
After enabling NTP time synchronization, the device will synchronize time according to the configured interval.

Steps
1. Go to Config Management, and find Timing.
2. Click Setting and enable NTP Enable.
3. Set parameters according to actual demands

image.png

 

4. Click OK after settings.

image.png

 

11.3 Enable Device Auto Work
This function allows the device to automatically enter the operation status after being powered on.
You can go to Config Management → Device Auto Work Enable, and enable Device Auto Work Enable.

image.png

 

11.4 Reboot Device
You can reboot the device via client software in 2 ways. Go to Config Management, and click Restart Device. Or, you can select the device to be rebooted in the device list, right click the device, and click Device Reset.

image.png