Recently Updated Pages
20. How to make EasyBuilder Pro work under Vista?
1. Go to EasyBuilderPro.exe, right click and select Properties 2. Go to tab “Compatibility” and ...
19. How to upload project to PC?
Utility Manager is an upload tool for uploading the exob files that run on HMI to PC, allowing th...
18. How to translate dtl to csv file
1. After users get the *.dtl file from HMI, open Project Manager and press EasyConverter 2. Sele...
17. How to decompile files?
This FAQ introduces how to decompile .exob file to .emtp file, and then edit the file in EasyBuil...
16. How to use 187.5K on S7-200/S7-300 PLC
1. Built-in MPI with 187.5K baud rate function is available on all of the MT6000i, MT8000i, MT800...
15. How to Capture the Simulation Screen Display ?
Screen capture is always required for users to edit manual guide. There are two ways of capturing...
14. MT6000/8000 Series HMI Upload/Download password Setup
MT6000/8000 series HMI provide reliable password protection. The factory initially set password t...
13. Download Upload Projekt Using USB/SD
How to download or upload project file by using USB disk or SD card? To download project file fro...
12. How to Setup the Printer
The following are the instructions for setting up the printer (take HP printer for example):1. Se...
11. Ethernet Pass-Through Communication
MT8000 provides Ethernet pass-through communication which allows PC to link to the PLC through th...
10. Display Chinese Fonts
How to display Chinese characters correctly? When you open a project that contains Chinese charac...
9. How to Decompile the xob file which uploading in the USB Disk
1. Upload the program file of the HMI to the USB disk, and then copy it to the PC (or use the fil...
8. Translate MT500 Project to MT8000
How to translate projects for MT500 model to MT8000/eMT3000 model EasyBuilder provides a feature ...
7. Change Model of Project
The following example shows how to change a MT8070iE (800 x 480) project to an eMT3120 (1024 x 76...
6. Update the MT8000/6000 OS
MT8000/6000 OS Image version is 20081013 or later, which supports using USB disk or CF card to up...
5. Speed Up the Display Rate on MT8000
When a large image is displayed, for example, using a 65536 color image as background image may c...
4. MT8000/6000 Touch Panel Adjust and System Initialization
Switch SW1 to ON position (as shown in picture 1). Press “Reset” or re-plug in the HMI. Pictur...
3. Customize Startup Screen
The startup screen on HMI can be customized, for example, putting the trademark logo. The followi...
2. Portrait Display on HMI
If the project file is edited in portrait mode, the following settings help todisplay project cor...
1. Notes on USB Cable
The following are some important points relevant to USB cable:HI-SPEED USB Revision 2.0 SHIELDED ...