Skip to main content

Aktualizacja OS z karty SD

Streszczenie: Aktualizacja OS z karty SD podczas restartu w panelach z gniazdem SD i przełącznikami DIP: DIP SW3 na ON, plik .bin na karcie, restart (ok. 2–3 min), potem DIP SW3 na OFF. Niektóre aktualizacje wymagają dwukrotnego wykonania.
EN: How to update the HMI OS from an SD card during reboot using DIP SW3; progress can be monitored on COM1 at 115200,N,8,1.

Dotyczy: panele HMI Weintek z gniazdem kart SD i przełącznikami DIP
Źródło: Weintek FAQ (materiały producenta), oryginalny tytuł: „How to Update OS with SD?”

In addition to configuring system settings, SD cards that store the required file can be used to update OS during reboot. Certain OS update can only be done by using SD card. This FAQ explains the procedure of updating OS with SD card. Applicable models: HMIs with 1. SD card slot and 2. DIP switches.

The update instruction:
Step 1. Flip DIP SW3 to ON position.
Step 2. Save the OS file (.bin) in SD card, and insert the SD card into HMI.
Step 3. Restart HMI to update. The update will take about 2~3 minutes. (To view the update progress, open Hyper Terminal on PC, use the following parameters (115200,N,8,1), and then connect the serial port of PC with the HMI’s COM1 RS-232. Hyper Terminal will display the update progress. When the update is completed, the message “Starting Kernel” will be displayed.)
Step 4. Flip DIP SW3 back to OFF position, and then restart HMI.

Note: Certain features and fixes become effective only after OS update is carried out twice. In this situation, please perform Step 3 twice

Słowa kluczowe

aktualizacja OS, karta SD, SD card, DIP SW3, przełącznik DIP, plik .bin, Starting Kernel, HyperTerminal, 115200, aktualizacja przy starcie, How to Update OS with SD?