Skip to main content

Wymiana folii ochronnej (overlay) panelu HMI

Streszczenie: Folia ochronna (overlay) paneli Weintek nie jest klejona do ekranu dotykowego, więc można ją wymienić: podgrzanie krawędzi opalarką (ok. 5 cm, ok. 65°C na powierzchni, ruchem posuwisto-zwrotnym) i powolne zdjęcie, potem naklejenie nowej.
EN: How to replace a damaged HMI overlay by warming its edge with a heat gun (about 65°C) and peeling it off slowly.

Dotyczy: panele HMI Weintek
Źródło: Weintek FAQ (materiały producenta), oryginalny tytuł: „How to Change HMI Overlay?”

For the design of Weintek HMI, the overlay and touch screen are not stick together with any glue substance, therefore, the screen will not be damaged when removing overlay. This allows users to change overlay freely. Generally, users may add a protective sheet on the overlay, however, this may reduce light transmission, and the appearance of HMI may not look good. If the overlay is damaged, users can always buy a new one and change it.


Step 1.
Use an industrial heat gun to heat up the edge of overlay around 1 minute. Please move the heat gun back and forth instead of staying at one point. Otherwise, the touch screen may be overheated and damaged. The recommended distance between the heat gun and the overlay is 5 cm, and maintain a 65°C temperature for the surface of overlay.

Ilustracja: Wymiana folii ochronnej (overlay) panelu HMI – The recommended distance between the heat gun and the overlay is 5 cm, and maintain a 65°C temperature for the surface…

Step 2.
When the surface of overlay turns warmer, remove it slowly when keep on heating it up, in this way the overlay adhesive won't be left on the panel. 

Ilustracja: Wymiana folii ochronnej (overlay) panelu HMI – Step 2.When the surface of overlay turns warmer, remove it slowly when keep on heating it up, in this way the overlay…

Step 3.
When the overlay is completely removed, if the front panel is still sticky, please
use some cleaning naphtha to wipe it.

Ilustracja: Wymiana folii ochronnej (overlay) panelu HMI – Step 3.When the overlay is completely removed, if the front panel is still sticky, pleaseuse some cleaning naphtha to…

Step 4.
Align the new overlay with one edge of the panel and lay flat. 

Ilustracja: Wymiana folii ochronnej (overlay) panelu HMI – Step 4.Align the new overlay with one edge of the panel and lay flat.

Step 5.
The changing of overlay is perfectly done

Ilustracja: Wymiana folii ochronnej (overlay) panelu HMI – Step 5.The changing of overlay is perfectly done

 

Słowa kluczowe

folia ochronna, overlay, wymiana folii, opalarka, heat gun, 65°C, uszkodzona folia, ekran dotykowy, front panelu, How to Change HMI Overlay?