Skip to main content

Wymiana baterii – seria X

Streszczenie: Wymiana baterii RTC (CR2032 3 V) w panelach serii X: wymiana baterii, podłączenie klawiatury USB, wejście do BIOS klawiszem Delete, ustawienie daty i czasu w CMOS Feature oraz „Load optimized default”.
EN: How to replace the CR2032 RTC battery in X series HMIs and reset date/time and defaults in the BIOS setup.

Dotyczy: panele HMI Weintek serii X (MT6000X/MT8000X)
Źródło: Weintek FAQ (materiały producenta), oryginalny tytuł: „Battery Replacement for X Series”

The MT-600X / MT8000X Series takes one coin type of CR2032 lithium battery to keep the RTC running. Battery specification: CR2032 3V lithium battery.
Steps for battery replacement:
1. Turn off the screen and open its rear cover.
2. Use a screwdriver to take off the battery from the socket.
3. Insert a new battery into the socket.
4. Put on the rear cover.
5. connect a USB Keyboard on HMI.
6. After reboot HMI, enter [Delete] for go to setup window.
7. Go to setup window and select [CMOS Feature] for setting the date and time.
8. Go to [Load optimized default] ==> click yes ==> click Enter ==> Click F10 for saving the settings. 

Ilustracja: Wymiana baterii – seria X – Go to [Load optimized default] == click yes == click Enter == Click F10 for saving the settings.

Note: Correct way to insert the new battery

Ilustracja: Wymiana baterii – seria X – Correct way to insert the new battery

 

Słowa kluczowe

bateria, wymiana baterii, CR2032, RTC, seria X, BIOS, CMOS Feature, Load optimized default, klawiatura USB, data i czas, Battery Replacement for X Series